Connect the Vehicle Communication Interface (VCI) to the vehicle's OBD-II port to diagnose and interact with the vehicle.
Hunter Collision Alignment
Keep more profits in-house
Hunter Collision Alignment
/
Alignment and ADAS calibration collide
Streamlined alignment measurements with collision blueprint path
Full diagnostic scans and ADAS calibration support
Documented results stored automatically in HunterNet® 2
Save time and expenses by keeping all services in-house
Collision Repair Alignment with HawkEye Elite®
Use your existing frame or collision repair rack to perform alignments in house. Learn how you can maintain control of the vehicle, improve quality, and decrease cycle time with in house alignment service.
Hunter Collision Alignment - Blueprint a Car for the Collision Repair Industry
Watch an explanation of blueprinting a vehicle for collision alignment, featuring Hunter's HawkEye Elite® Alignment equipment and patented WinAlign® software.
Hunter Collision Alignment - Understanding Advanced Diagnostic Alignment Angles
See techniques for understanding advanced diagnostic alignment angles for the collision industry, featuring Hunter's HawkEye Elite® Alignment equipment and patented WinAlign® software.
Collision Aligner Integration
Perform all services in-house to improve cycle time, quality and satisfaction
Pre-Repair Diagnostic
Check for hidden issues that could delay vehicle delivery at the end of the repair process.
Pre-Scan
Know the vehicle’s condition before you start the repair. Allows for better estimating and ordering the right pieces/parts up front.
Alignment
Ensure the vehicle is ready to perform and handle as the OEM designed it. Also confirms the vehicle is properly set for ADAS Calibration.
Steering Angle Sensor Reset
Reset the electronic steering system to match the vehicle's direction of travel after alignment.
ADAS Calibration
Re-calibrate the safety systems to ensure they perform as the OEM intended.
Post Scan
Document that all the vehicle’s systems are re-connected and operating properly with no codes prior to delivering the vehicle back to it’s owner.
Send a message to your local Hunter business consultant to receive a free pricing quote or product demo.
This contact form is intended for legitimate Hunter equipment and service inquiries. All other use is prohibited and will be discarded. See Full Terms of Use
Blueprint Workflow
Uncover hidden collision issues before work begins
Multiple measurements with minimal effort
Simply perform a caster steer and place ride height targets to calculate these collision alignment measurements:
- Live ride height
- Toe out on turns
- Max steering angle
- Symmetry and setback measurements
- Suspension body dimension audit (SBDA) with live ride height
Keep profits in-house
Why sublet a profitable service?
7 days — Typical collision repair timeline
Estimate, body work, paint and mechanical
+1 day — In-house alignment
Avoid vehicle transportation and keep valuable profits by aligning in house.
+3 days — Sublet alignment and ADAS
Subletting alignment and ADAS work adds time and hassle for both you and your customer as well as losing profits.
ADAS Solutions
Keep ADAS work in your own shop
Perform static and dynamic ADAS calibrations
Hunter ADASLink® Full Diagnostic Scan Tool
- Dynamic (driving) ADAS calibrations
- Static (fixture) ADAS calibrations with DAS 3000
- FCA secure gateway compatible
- Pre- and post-scan ready
DAS 3000 ADAS Fixture
- No more plumb bobs and tape measures
- Guided positioning system with ADASLink®
- Hunter training and support
- First year of static calibration software included
Pre- and Post-Scans
Dynamic Calibrations
Perform dynamic calibrations while driving the vehicle as required.
Forward-Facing Radar & Camera Calibrations
Calibrate front radar and camera sensors as they relate to the vehicle's direction of travel.
Blind Spot & Surround View Calibrations
Calibrate side and rear sensors that notify the driver of potential hazards outside of their field-of-vision.
Online Wheel Alignment Adjustment Guide
Hunter's well-known and respected 1708-T Alignment Guide is now available to Hunter customers via the HunterNet® 2 portal at no charge. The guide is a staple of point-of-sale counters, serving as the go-to source for service advisors quoting alignment work and ADAS requirements.
Online ADAS Coverage Lookup
Quickly lookup ADAS vehicle coverage from your HunterNet® 2 portal.
- View dynamic (ADASLink®) and static (DAS3000) coverage
- Access from anywhere online
- Automatic new vehicle coverage updates
Keep ADAS profits, and save time for you and your customers.
Efficient workspaces
Limited space and equipment? No problem.
Hunter's portable turnplate kit includes ramps, turnplates, chocks and a wheeled cart that provides easy mobility and compact storage.
+
Portable
Ramps
Provide low-profile access to turnplates.
+
Portable
Turnplates
Perform vehicle alignment using Hunter's high-quality turnplates.
+
Portable
Wheel chocks
Use light-weight, durable wheel chocks to keep the vehicle in place.
+
Portable
Wheeled cart
Store all equipment in the mobile cart for transporting around the shop.
Frame rack
Hunter's portable turnplate kit is compatible with most frame racks.
Flat floor
Inspect vehicles during estimation or set up a bay on the floor to align vehicles that are too large or long for your existing alignment lift.
Your local Hunter service representative can answer questions, help with equipment operation and provide on-site training.
Purchase genuine Hunter replacement parts online
This contact form is intended for legitimate Hunter equipment and service inquiries. All other use is prohibited and will be discarded. See Full Terms of Use
Your local Hunter trainer is ASE-certified to help you learn and excel trough in-depth classes with appliable hands-on training.
This contact form is intended for legitimate Hunter equipment and service inquiries. All other use is prohibited and will be discarded. See Full Terms of Use
Documents
-
Brochures
-
Ordering Guides
-
Accessories
-
Printouts
Hunter's 3-Year Warranty
We stand beside our equipment and your purchase.
Hunter Engineering Company warrants new equipment replacement parts for three years and labor for six months.
Explore further
HawkEye Elite® Alignment
Productive, profitable wheel alignmentsFour precision cameras measure each wheel using Hunter’s patented QuickGrip® adaptors.
Hunter service
Largest in the industryHunter deploys the largest service force of highly-qualified representatives in the industry.
Designed & Built in the USA
Family owned, goal-drivenExpert assembly goes into each alignment system, alignment console, tire changer, balancer, brake lathe and other components.